Car Blind Spot Detection System Lane Change Warning System Safety Driving Warning Light For Motorcycles Cars Safety DrivingBullet Points:1Two States: The warning light can emit a signal. There are two states. State 1 is always on, and state 2 is flashing. When driving, you can make corresponding responses in time according to these two states.2Blind Spot Detection: When the vehicle speeds exceeds 15km/h and there is a target car in the blind spot, the indicator light will be on, which is to indicates safety.3Easy to Install: The cable of the Blind Spot Warning Light is approx. 10in long. It is very easy to install. After installation, driving safety will be more guaranteed.4Wide Range of Applications: The Blind Spot Prompt Light is used in motorcycles, cars, etc. It is a necessary vehicle assistance device that helps driver lane change safely.5Ultra-bright LED: There are optional light colors, which are red light and yellow light. The Blind Spot Detection Light is also a highlighting warning light, which is a must-have car accessory.The Blind Spot Prompt Light is ultra-bright. It has red light and yellow light. It is a necessary vehicle assistance device that helps driver lane changing safely.Device Normal State:1. After the device is powered on, the left and right indicators flash 3 times respectively.2. When the vehicle speeds exceeds 15km/h and there is a target vehicle in the blind spot, the indicator light is on.Specifications:Cord length: about 10 inUse: prompt lightMaterial: LEDOperating temperature: -25+75(-13167)Net weight: about 25gApplicable models: universalVoltage: 5V, 12VPacking List:2* Prompt LightNotes:Due to the lighting effects and shooting angles, there are color differences in the product, please understand.Due to manual measurement, there is a tolerance in the product size.