Temperature and Pressure Safety Valves (T/P Valves) 0.7Mpa equals 102PSI Detailed introduction: Temperature and pressure relief valves (T/P valves) are suitable for use with various water heaters, including solar water heaters, electric water heaters, heat pump water heaters, and boilers. The T/P valve provides automatic temperature and pressure relief, offering dual safety protection for pressurized water heating systems. It serves as a critical safety component for current pressure water heaters. Features: Safety relief valves are commonly used to regulate pressure in heating systems, domestic hot water tanks, boilers, and general water systems. When the system reaches the calibrated pressure, the valve opens to release pressure into the atmosphere, preventing dangerous overpressure conditions that could damage the system or components. Calibration pressure options: 0.1, 0.15, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, 1.0 MPa Pressure deviation: ±0.015 MPa for pressures up to 0.5 MPa; ±3% of the rated pressure for pressures above 0.5 MPa Technical specifications: Color: Gold Materials: - Body: 3/4 inch brass - Control spindle: brass - Sealing gasket: silicone gel - Spring: SUS304 stainless steel Nominal pressure: PN10 Temperature range: 5–110°C Set pressure options: 0.5, 0.6, 0.7, 0.8, 0.9, 1.0 MPa Set pressure deviation: -10% to +5% of set pressure Set temperature: 99°C ±4°C Inlet and outlet connection: BSPP 3/4" x 3/4" Weight: 238g Dimensions: 83 x 42mm Package included: 1 x Pressure Valve Note: Other items not included. Note: Lighting and display differences may cause slight variations in color between the product image and actual item. Measurement may vary by ±1–3cm.