Rivet Gun for Electric Cordless Drill - Cordless Riveting Tool - Nut Adapter - with 3 Convertible Heads + 40 Pop Rivets <ul><li>Products as accessories can be combined with various types of power tools to use, the minimum torque force of power tools is 15 Nm</li><li>4 size nozzles (3/32&#34;, 1/8&#34;, 5/32&#34; and 3/16&#34;). They can be applied to various sizes of rivets</li><li>10 aluminum pop rivets 9.5mm x 0.9cm, 0.9cm x 0.9cm</li><li>The 2 wrecks make it easy to open the product when the nail is stuck</li><li>3 convertible heads are important. Convenient to repair products and increase the service life</li><li>Product Contents: 1 rivet adapter. 2 wrenches. 3 rivets. 3 convertible heads (if the built-in head is broken, you can change it by yourself). 4 nozzles. Technical Data: Nozzle Size: 0.95cm, 0.95cm, 5/32&#34; and 3/16&#34; 3/32&#34; x 1/4&#34;, 1/8&#34; 3/20. 3cm, 10 Popular Size Aluminum Pop Rivets: Woodworking, Stainless Steel, Pipes. Type: Brad Nail Gun. Power Source: Works with Electric Drill. Maximum Speed: 1000 RPM. Minimum Torque Force: 15Nm Aluminum: 2.4cm. mm - 4.5mm. 8mm Steel: 2.4mm-4.0mm. How to Operate: 1. Choose the right opening size for your rivet, there are 4 to choose from. 2. Attach the tool to the cordless drill. 3. Hold the tool, before it starts to grip the rivet, press the reverse side down on your drill until you feel a click. The rivet can be mounted once the teeth are widened. Put the rivet in the tool and slowly hold the handy part of the tool and pull the trigger, when you feel it start to grip the rivet. 4. Put it in the hole you want to rivet, hold the handy part and hit the drill at full end. 5. Once the rivet drops, hold the handy part of the tool and hit the reverse side on your drill. 6. The teeth will widen and the old rivet shank will fall to the ground. Return your drill to the forward position and rinse</li></ul>