Rivet adapter: Easily change your electric drill into an electric rivet Easily pull the rivets, no need to spend a lot of effortFast and convenient, saves time and effort and is durable,Easy installationThe hexagonal screw can be used after it is connected to the drill.Made of aluminum alloy, painted on the surface, rust-proof, durableThe guide can be replaced according to the size of the rivetEasy and fast operation:woodworking, stainless steel, pipesPower Source:work with the electric drillMAX RPM:1000 RPMMin Torque Strength:15 m of operation:1. Turn on the electric drill2. Connect the electric drill3. Install the auxiliary handle4. It needs to be rotated counterclockwise to before inserting the rivet5. Put in the correct rivets6. Pull out the rivet clockwise7. Exit the rivet counterclockwiseNote:1. When using the rivet adapter, you need to hold the front handle to work normally.2. Rivets above M5x20 / 3.2x20 / 2.4x20 cannot be used.3. Stainless steel rivets cannot be used.4. If you don't follow the procedure, the nail will be stuck or the nail cannot be pulled.5. If the rivet cannot be removed, please unscrew the socket head and press it with a wrench to pull it out.Colour:RedMaterial:aluminumPackage Contents:1 * Electric Rivet Adapter200 * rivetsOnly the above package content, other products are not included.Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.