Electronic Pool Chlorine and pH Tester - Water Quality Meter

¥1,599
+ 配送料¥1,949

Electronic Pool Chlorine and pH Tester - Water Quality Meter

  • ブランド: Unbranded

Electronic Pool Chlorine and pH Tester - Water Quality Meter

  • ブランド: Unbranded
希望小売価格: ¥8,990
価格: ¥1,599
得する金額: ¥7,391 (82%)
販売元:
¥1,599
+ 配送料¥1,949

在庫あり

以下の支払い方法を利用することができます

説明

Chlorine test setup point: Before first use, set up the tester for pool water or hot spring water to be tested in the following order: 1. Use traditional liquid test tools to test the water pool or hot spring water;2. Record chlorine readings available for use (1.5 PPM) 3. No pH adjustment needed. Find the tester's set point: A. Insert a 1.5V AA battery (positive side up) into the battery compartment in the handle. B . Hold the tester in one hand and the test stick in the other.C. Insert the cleaned metal rod into the water to the black position.D. Gently stir the water with a metal rod.E. When the metal rod is kept in water, turn the knob on the front of the watch in the CL direction until it can no longer be turned. Then slowly adjust to the right until the pointer points to the position of the result measured by the traditional floating the test tool (eg 1.5).F. Pull the test stick out of the water and be careful not to move the button. The pointer slides to the right and stops with a letter between A and E. This letter is the point adjustment. Note: Before each chlorine test, the meter must be set to " set point".Test of pH value: The recommended chlorine content of pool water or hot spring water is 7.2-7.8A) Leave the test stick in the water and turn the knob in the direction of pH to emit a beep (the battery must be removed when reading PH).B) Wait until the pointer stops swinging and take a pH reading. C) Gently wipe the test stick, insert it into the slot next to the tester and store it. Test Chlorine Level: The recommended chlorine level in pool water or hot spring water is 1.2 to 1.7 ppm A) Set the pointer to the "set point" position. B) Hold the tester in one hand and the test stick in the other hand, insert the metal stick into the water to the black position. Wait until the pointer stops swinging and take a reading. C) Leave the test stick in the water and continue to perform the pH test according to the instructions.specification< br/>6. Battery: use 1 AA batteryStorage method:To extend the life of PC-101 pool tester and ensure accurate measurement,Note: 1. When not in use, turn the knob to the closed position ( in the PH direction until it cannot be turned anymore).2. Store in a cool, dry place and avoid direct sunlight.3. Don't Do not immerse the test stick in any liquid other than pool water and hot spring water. 4. Check regularly if the battery is sufficient - the tester uses a 1.5V AA alkaline battery
  • Fruugo ID: 402386147-854971572
  • EAN: 6086200278962

製品安全情報

以下に概説するこの製品に固有の製品安全性情報を参照してください。

以下の情報は、この製品を販売する独立したサードパーティ小売業者によって提供されています。

安全上の警告: Do not let your children touch this product alone to avoid swallowing or other injuries.

配送と返品

3日間以内に発送

  • STANDARD: ¥1,949 - 間の配達 金 31 10月 2025–金 07 11月 2025

中国より発送。

ご注文の商品は、お客様の仕様に従い、万全の状態で配送されるように最善を尽くしています。しかし、もし注文に抜けがあったり、注文したものと違う商品が届いたり、注文に満足できないその他の理由がある場合は、注文全体やその中のいずれかの商品を返品し、その全額の返金を受けることができます。 全額返金ポリシーを見る

製品コンプライアンスの詳細

以下に概説されているこの製品に固有のコンプライアンス情報を参照してください。

以下の情報は、この製品を販売する独立したサードパーティ小売業者によって提供されています。

製造業者:
次の情報は、Fruugoで販売される関連製品の製造業者の連絡先詳細です。

  • Fo Shan Shi Gua Gua Chuan Mei You Xian Gong Si
  • Foshan Guagua Media Co., Ltd.
  • No. 26, 5th Floor, Main Building, Real Estate Development Building, No. 38, Nanguidong Road, Guicheng, Nanhai District, Foshan City
  • Foshan
  • CN
  • 528000
  • rong1122023@outlook.com
  • 13169676597

EUにおける責任者:
次の情報は、EUにおける責任者の連絡先情報の概要です。ここで言う責任者とはEUに拠点を置く指定経済事業者で、EU域内で販売される関連製品に関するコンプライアンス義務を負う者のことです。

  • DISCOUNT INDUSTRY
  • DISCOUNT INDUSTRY
  • 10 Rue Des Grands Pres, 60230 Chambly, Oise, France
  • Chambly
  • FR
  • 60230
  • DISCOUNT-INDUSTRY@outlook.com
  • 0033 748562127