Electrical Lockout Tagout Kit High Temperature Resistant Circuit Lock Outs Set with Tool Box Item Type: Lockout Tagout Kit Material: ABS, nylon, stainless steel, brass Purpose: Lock marking products and safety equipment Cleat Inside Diameter: 1in, 1.5in Padlock Standard: Lock beam diameter approx. 6mm/0.24in, length approx. 38mm/1.50in Ball Valve Lockout(ASBV-01) : Suitable for ball valves with pipe diameters less than 1.3cm-6.4cm/0.51-2.52in in closed state, with locking range reduced to 1.3cm-3.2cm/0.51-1.26in in open state Valve Lockout GV-01: Suitable for 25mm-64mm (1in-2.5in) handwheelGate Valve Lockout AC-01-2: Diameter approx. 6mm/0.24in, length 1.8m/70.87in Plug Lock Box Size: Approx. 118x65x65mm/4.65x2.56x2.56inCircuit Breaker Lockout MCPO: Standard type with pins facing inward. The circuit breaker must have two holes with a hole spacing ≤13mm Circuit Breaker Lockout MCPI: Standard type with pins facing outward. The circuit breaker must have two holes with a hole spacing <11mm Clamp Type Circuit Breaker Lock Scope Of Application:CB-07: Suitable for MCCB with handle width ≤16.5mm CB-08: Suitable for MCCB with handle width ≤41mm