Name: Type: Earth Leakage Origin: Mainland China Customized: Yes Model Number: TORE1-63 Certification: CE Model: 30mA, 100mA, 300mA are electromechanical type Model 2: 10mA is electronic type Rated making and breaking capacity: 630A Breaking capacity: 6kA Rated voltage: Default 230V; 110V available upon customization Standard: IEC/EN 61008-1 Rated frequency: 50/60Hz This product does not include over-current protection. It must be used in combination with an MCB. Important: Power input must be connected from the top side only; incorrect wiring will damage the device. Note: 30mA, 100mA, and 300mA models are electromechanical type; 10mA model is electronic type. Default voltage range is 220V–250V. For 110V version, customization is required—please contact support prior to order. General: Residual Current Circuit Breaker (RCCB) is suitable for AC circuits with rated voltage of 230/400V, frequency 50/60Hz, and rated current up to 63A. The RCCB provides indirect protection for personnel in cases where exposed conductive parts are properly earthed. It also helps prevent fire hazards caused by earth fault currents when over-current protection devices fail. Special Notes: 1. RCCBs with rated sensitivity of 10mA can serve as supplementary protection in the event of failure of primary protection against electric shock. 2. Designed for household and similar applications, intended for non-professional use with no required maintenance. 3. RCCB does not protect against electric shock from direct contact between live conductors or leakage between both protected lines. 4. It is recommended to install surge protective devices (SPDs) or surge arresters upstream of the RCCB to guard against transient overvoltages. 5. When used under specified conditions, RCCBs equipped with ON-OFF indication are suitable for isolation purposes. Quality and Safety: High-quality safety switch with upgraded design CE certified, flame-retardant enclosure, viewable tripping indicator window Ergonomic D-shaped handle for comfortable operation Precision manufacturing for durability and reliability Suitable for operation in varying temperature environments Product Features: - Thermosetting plastic housing ensures high heat resistance and structural integrity - Visual indicator window turns red when the device trips due to fault - Designed for easy busbar connection, enabling direct combination installation - Complies with IEC/EN standards for end-user installation - CE CB certification ensures international compliance - Ergonomic handle design enhances comfort and control - Top-entry wiring for simplified and secure connections - Mechanical life: 20,000 operations - Electrical life: 10,000 operations (rated current at maximum voltage) Data sourced from inspection reports by Zhejiang Low Voltage Electrical Products Quality Inspection Center