Electric Enema Bucket Kit 2000ML Colon Cleansing Reusable USB Charging Hydrotherapy System for Home Item Type: USB Electric Colon KitMaterial: ABS Battery (Built In Battery): Lithium ion Battery, 3600MAH Product Size: Approx. 26.8 x 14.1 x 12.4CM / 10.55 x 5.55 x 4.88in Water Tank Capacity: 2000ML / 67.63oz Maximum Flow Rate: 1.3L/min Charging Voltage: 5V USB CableFunction: Control (simple and convenient), regulator (infinitely variable speed), portable (split type, easy to clean) charging (built in lithium)Nozzle Configuration: Cleaning Nozzle, Enema Irrigation Nozzle Product Features: Main Body and Water Tank Detachable, USB Charging, Stepless Speed Control Usage: Use with Water Tank for Water Filling or Can Also be Used with Mineral Water Bottle(not included), Either OneCharging Method: Open the charging port waterproof plug on the top of the main body, and use a Type C data cable for charging. The input voltage is 5V and the charging current is 1A. The red light indicates charging, and the green or blue light indicates a full charge.  Expansion Methods: 1. Twist off the water tank counterclockwise and store it in a dry environment. 2. Open the mineral water bottle and invert the main body. Rotate the water bottle counterclockwise onto the main body. 3. Place the main body upright with the mineral water bottle in an inverted position. Weight: Approx. 1113.00g / 39.37ozInstructions for using the bowel cleansing device:1. Pour warm water (around 38 degrees Celsius) into the device and attach the bowel cleansing nozzle.2. Sit on the toilet, relax your body, lean forward slightly, and hold the handle closely against the anal opening from behind (do not insert it deeply into the rectum).3. Turn the switch clockwise to release the water. The water will enter the rectum under pressure. Stop the flow when you feel the urge to defecate.4. Hold for a short while, approximately 10 minutes, and then evacuate the feces. Installation Steps:Step 1: Pour 2000 milliliters of warm water (36‑40 degrees Celsius) into the bowel cleansing device and cover it.Step 2: Insert one end of the tube into the water outlet of the device and the other end into the handle. Usage Steps:1. The user squats on the toilet, places the device on the ground or table, and removes any remaining air from the tube after turning it on. Then, insert the bowel cleansing nozzle shallowly into the rectum. Open the pressure control switch slowly until reaching a comfortable pressure. Fill the rectum with the warm water.2. When you feel the urge to defecate, close the knob switch, remove the bowel cleansing nozzle, and relax the anal muscles. The feces will be expelled along with the water, achieving the purpose of bowel movement.3. After completing the bowel cleansing, dispose of the used bowel cleansing nozzle in the trash or clean it for reuse. Replace it with the cleaning nozzle and position it against the anal opening for cleaning. After use, pour out any remaining water from the water box, remove the tube, dispose of it in the trash or clean it for reuse. Let the device ventilate and dry. Store it properly in a dry place for future use.