3500W Electric Water Heater Stainless Steel Automatic Immersion Heater 220V This 3500W electric water heater is made of stainless steel and features an automatic immersion design for fast and efficient heating. Ideal for use in bathtubs, buckets, inflatable swimming pools, fish tanks, and other water containers. The heater is designed to float and can be positioned in place using the power cord. Ensure the water level is at least 25 to 30 cm to allow proper submersion of the heating element. The heating pipe must be fully submerged in water during operation to prevent damage. For added safety with inflatable or soft-material containers, place a ceramic base under the heating pipe to avoid direct contact. To use, fill the container with water, place the heater in the water, and plug it in. The indicator light will turn on, and bubbles will form around the heating element as the water begins to warm. For large volumes of water, unplug the unit halfway through heating to check the temperature. Once the desired temperature is reached, unplug the power, wait 20 seconds, then remove the heater before using the water. Do not touch the water during heating. Always unplug the device before handling. Specifications: - Type: Electric Water Heater - Model Number: Electric Water Heaters - Power: 3500W - Cable Length: 1.5m - Voltage: 220V 50Hz - Material: Stainless Steel + PP Plastic Safety Notes: - The metal heating tube must be completely submerged in water during use. - Never use the heater outside of water or while in contact with water. - Do not allow human contact with water during heating. - Unplug the device before removing or handling. - The stainless steel ball must be fully submerged to avoid damage. Package Included: 1 x Heater (Adapter included according to destination country)