3500W Electric Water Heater Stainless Steel Automatic Immersion Heater 220V This 3500W electric water heater is designed for fast and efficient heating. It features a stainless steel construction with a PP plastic housing for durability and safety. Suitable for use in bathtubs, buckets, inflatable swimming pools, fish tanks, and other water containers. To use, ensure the water level is at least 25–30 cm deep so the heater can be fully submerged. The unit will naturally float on the surface; adjust the power cord to position it correctly. Always make sure the heating element is completely submerged in water during operation to prevent damage. For inflatable or thin-material containers, place a ceramic tile under the heating pipe to avoid direct contact and potential damage. Once the container is filled with water, place the heater inside and plug it in. The indicator light will turn on, and small bubbles will form around the heating pipe as it begins to heat the water. For large volumes of water, unplug the unit halfway through heating to check the temperature. When the desired temperature is reached, unplug the power immediately and wait 20 seconds before removing the heater from the water. Do not touch the water while the heater is operating. Safety Notes: - The metal heating tube must be fully submerged in water at all times during use. - Never touch the water while the heater is plugged in. - Always unplug the device before adjusting or removing it. - The stainless steel ball component must remain entirely underwater during heating to avoid damage. Specifications: - Type: Electric Water Heater - Model Number: Electric Water Heaters - Power: 3500W - Cable Length: 1.5m - Voltage: 220V 50Hz - Material: Stainless Steel + PP Plastic Package Includes: 1 x Immersion Heater (Adapter included based on destination country)