3500W Electric Water Heater Stainless Steel Automatic Immersion Heater 220V This 3500W electric water heater is made of stainless steel and features an automatic immersion design for fast and efficient heating. Suitable for use in bathtubs, plastic barrels, buckets, fish tanks, swimming pools, and other water containers. To use, ensure the water level is at least 25 to 30 cm deep so the heater can be fully submerged. The device will naturally float on the surface; adjust the power cord to position it correctly. The heating element must always remain completely submerged during operation to prevent damage. For inflatable pools or bathtubs, place a ceramic tile under the heating pipe to avoid direct contact with the container material. Fill the container with water, place the heater inside, and plug it in. The indicator light will turn on, and bubbles will form around the heating tube as it begins to heat the water. For large volumes, unplug the unit halfway through heating to check water temperature. Once the desired temperature is reached, unplug the power supply and wait 20 seconds before removing the heater. Do not touch the water while the device is plugged in. Safety Notes: - Never use the heater without sufficient water coverage. - Always unplug before touching the water. - The stainless steel heating element must be fully submerged at all times. - Not intended for continuous immersion or industrial use. Specifications: - Type: Electric Water Heater - Model Number: Electric Water Heaters - Power: 3500W - Cable Length: 1.5m - Voltage: 220V 50Hz - Material: Stainless Steel + PP Plastic Package Includes: 1 x Immersion Heater (Adapter included based on country requirements)