3500W Electric Water Heater Stainless Steel Automatic Immersion Heater 220V This 3500W electric water heater is made of stainless steel and features an automatic immersion design for fast and efficient heating. Suitable for use in bathtubs, buckets, inflatable swimming pools, fish tanks, and other water containers. To use, ensure the water level is at least 25 to 30 cm to allow the heater to remain fully submerged. The unit will naturally float, and the power cord can be adjusted to position the heater correctly. Always ensure the heating element is completely submerged during operation to prevent damage. For inflatable or soft-walled containers, place a ceramic tile or similar non-conductive material under the heating tube to prevent direct contact with the container surface. Once the container is filled with water, place the heater inside and plug it in. The indicator light will turn on, and bubbles will form around the heating element as it begins to heat the water. For large volumes of water, it may be necessary to unplug the unit halfway through heating to check the temperature. When the desired temperature is reached, unplug the power immediately and wait 20 seconds before removing the heater from the water. Safety instructions: - The metal heating tube must be fully submerged in water at all times during operation. - Never touch the water while the heater is plugged in. - Always unplug the device before adjusting, removing, or coming into contact with the water. - Do not use the heater outside of water or while bathing. - The stainless steel heating element must remain entirely underwater to avoid damage. Specifications: - Type: Electric Water Heater - Model Number: Electric Water Heaters - Power: 3500W - Cable Length: 1.5m - Voltage: 220V 50Hz - Material: Stainless Steel + PP Plastic Package Includes: 1 x Heater (Adapter included based on country of destination)