Clock movement: high torque clock movement with hook, long shaft, drive long clock hands (10 mm to 450 mm) shaft length: 28 mm (1-1/10 inches), thread length: 154 mm (3/5 inches), suitable for 9-13 mm (9/25-1/2 inches) thickness clock panelSize from the center of the hole to the tip: the hour hand is approx. 203 mm/80 inches long; The minute hand is about 305 mm/12 inches in length; Note: please check the size before buyingGood DIY clock supply: suitable for repairing, replacing the broken parts of a clock or serving as good handwork materials to make a clock by yourselfWarm notice: there are some clock parts made of aluminum, please do not install them with too much pressure or they will be bentcolour: black + goldMaterial: plastic + aluminumSize: Movement: 56x56x162mmPackage Contents:1 x Quartz clock movement1 x Close nuts1 x Minute hand1 x Hour hand1 x Plastic washer1 x Brass washer1 x Brass nut1 x Metal hookOnly the above package content, other products are not included.Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.