Item Details:*1L Plastic Replacement Foam Bottle For High Pressure Washer Snow Foam Lance*100% brand new and high quality*Color: As Pictures Show*Pressure range: 2000-5000 psi*Bottle capacity: 1L*Maximum water temperature: 60 C (140 F)How to use:1. Put PTFE tape on the brass tube (two wires). Each thread needs 50 cm of PTFE tape.2. Put the adapter with brass tube and suction tube in the foam lance unit3. Fill the liquid bottle with the desired amount of shampoo.4 Fill the liquid bottle with water (for best results, use hot water, 20% shampoo + 80% suggested water)5. Shake the liquid bottle to mix the shampoo with water thoroughly6. Connect the fluid bottle to the foam lance unit7. Connect the adapter to the pressure washer tool and then you are ready to use itPackage Contents:1*Foam Bottle Note:1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.2.Please allow slight manual measurement deviation for the data.