3500W Electric Water Heater Stainless Steel Automatic Immersion Heater 220V This 3500W electric water heater is made of stainless steel and features an automatic immersion design for efficient heating. Ideal for use in bathtubs, buckets, inflatable swimming pools, fish tanks, and other water containers. The heater is designed to float and can be positioned in the water by adjusting the power cord. Ensure the water level is at least 25 to 30 cm to allow proper submersion of the heating element. The heating pipe must be fully submerged during operation to prevent damage. For added safety, especially with inflatable or plastic containers, place a non-conductive material such as ceramic under the heating pipe to avoid direct contact with the container surface. To use, fill the container with water, place the heater in the water, and plug in the power. The indicator light will turn on, and bubbles will form around the heating element as the water begins to warm. For large volumes of water, it may be necessary to unplug the unit halfway through heating to check the temperature. Once the desired temperature is reached, unplug the power supply and wait 20 seconds before removing the heater from the water. Safety instructions: - The metal heating tube must be completely submerged in water during operation. - Never touch the water or heater while it is plugged in. - Always unplug the device before handling or adjusting it. - Do not use the heater outside of water or while in contact with the human body. - The stainless steel heating element must remain fully submerged to avoid damage. Specifications: - Type: Electric Water Heater - Model: Electric Water Heaters - Power: 3500W - Cable Length: 1.5m - Voltage: 220V 50Hz - Material: Stainless Steel + PP Plastic Package Includes: 1 x Heater (Adaptor included based on destination country)