Feature:1. Multifunctional: This high voltage differential probe kit is multifunctional and can convert incoming high voltage signals to low voltage signals for oscilloscope observation and analysis.2. Easy To Use: This oscilloscope probe kit is powered by USB DC 5V output, and has USB interface, which is easy to use and easy to carry. You can safely measure floating voltages up to 700 V with a bandwidth of up to 100 MHz.3. Good Compatibility: This differential probe kit is well adapted to 20X and 200X attenuation rates, and can be used with any brand of oscilloscopes to meet the needs of floating measurements.4. Excellent ABS Material: This high voltage differential active probe is made of excellent ABS material, which is sturdy and durable, not easy to be damaged, and has a long service life.5. Wide Application: This high voltage differential probe has a wide range of applications and can be used for floating measurements, switching mode power supplies (SMPS), motor drive design, power device test and evaluation, and power converter test and design.Specification:Material: ABSModel: DP10007Bandwidth: 100MHzRise Time: 3.5nsAttenuation: 20X, 200XAccuracy: 2%Noise Floor:Full Bandwidth: 20X 22mVrms, 200X 80mVrms5MHz Bandwidth Limit: 20X 8mVrms, 200X 70mVrmsCommon Mode Rejection Ratio: DC >-80dB, 100kHz >-60dB, 10MHz >-30dB, 100MHz >-26dBDelay Time: 11.99ns (20X), 12.27ns (200X)Power: 2WPower Supply: Type C InterfaceOverload Indication: LED Alarm, BuzzerSize: Control Module: Approx. 91 x 33 x 15mm / 3.58 x 1.3 x 0.59in, Signal Box: Approx. 100 x 36 x 20mm / 3.94 x 1.42 x 0.79inOutput Cable Length: Approx. 120cm / 47.24in ( There will be a slight error in manual measurement )Temperature:Operating: 0-40Non Operating: -30-70Humidity:Operating: 5%-85%RH (0-40)Non Operating: 5%-85%RH (40), 5%-45%RH (40-70).Package List:1 x High Voltage Differential Probe Main Unit2 x Crocodile Clips1 x Type C Cable1 x Manual2 x Telescopic IC Clips1 x Plug1 x Storage Box