1. Do not approach sharp objects such as thorny plants or sharp stones and blades. 2. When using, add a base cloth under the inflatable product to prevent it from being punctured by debris. 3. Don't use it as a lifesaving float.4. Keep away from flames or hot objects. 5. When the temperature is high, do not put the inflatable product with the valve closed in the car or tent. 6. Don't stick to sunscreen or alkaline medications. 7. Please keep it out of reach of pets.8. The valve part is hard and should be avoided when resting. 9. Do not expose to the sun for a long time, the UV light will slowly damage the surface material. {How to repair an inflatable product} A. Repair the needle hole: If your inflatable product is accidentally punctured by a needle or wood thorn in one or more small pinholes, it is easiest to repair: 1. After the product is deflated, cover the air nozzle, Reduce the gas flow in the bed; 2. 2. Take out the glue in the repair kit and put a drop of glue on the needle eye; 2. 3. If the eye of the needle is large, take a toothpick, dispense glue with the tip of the toothpick, apply it to the eye of the broken needle, and then fill the eye of the needle with glue; After the repair is complete, wait four hours before inflating. B. Repair a scratched or scalded mouth If your product is accidentally cut by a knife or burnt with a large hole, please don't panic, it can be repaired in the following order: 1. After the product is deflated, cover the gas nozzle to reduce the gas flow in the bed; 2. 2. Find the patch material in the repair bag and cut a piece that is large enough to cover the broken seam; 2. 3. Apply glue on the damaged part, press the patch tightly, and glue the side seam of the patch; 4. Apply pressure to ensure that there is no gap on the rubber surface, and press it with a smooth weight; 5. Wait eight hours before inflating and the repair is complete. C, suede repair 1. Carefully clean the repaired area; 2. 2. Take out the patch after drying, cut it well, cover the damaged surface, and leave a little around it; 3. 3. Apply a layer of glue on the patch and damaged surface, and paste the edge seam of the patch to ensure complete sealing; 4. 4. Press down with a smooth weight; Press down with a heavy object, inflate after 24 hours, and the repair is complete. Other matters: 1. Remember not to inflate too much (especially in summer), and do not exercise too much on the product, otherwise the pull strap in the product will be overloaded and broken, resulting in the product bulge that cannot be repaired and can only be scrapped. 2. Repair glue is a chemical substance, please do not Contact with eyes or if swallowed.