1. LCD can display input/output voltage/temperature, output current/output power/output capacity/output time;2. Numerical control adjustment, precise and fast, can be boosted or stepped down, output voltage 0.6-36V can be adjusted arbitrarily, limit current 0-5A can be adjusted arbitrarily;3. The input terminal is against reverse connection, and the reverse connection will not burn;4. The output terminal is anti-backflow, and there is no need to an anti-backflow diode when charging the battery5. The module can be set to turn on/off by default;6. Possess a of software protection mechanisms, and the protection is adjustable. After the module's working parameters the protection , the output is automatically turned off.7. The output ripple is small, with filter;8. Thicker heat sink, two-way ventilation, better heat dissipation effect.Product parameters:Input voltage: 6.0-36VOutput voltage: 0.6-36vOutput current: 5A maxOutput power: 80wVoltage display resolution: 0.01VCurrent display resolution: 0.001AConversion efficiency: about 88%Soft : Yes (it may fail when the module with high power load is started)protection mechanism:Input anti-reverse connection;Output anti-backflow;Input undervoltage protection (5.8-36V adjustable, default 5.8V)Output overvoltage protection (0.6-36V adjustable, default 36V)Output overcurrent protection (0 -5A adjustable, default 5A)Output over power protection ((0 -80W adjustable, default 80W)Over temperature protection (80-110C adjustable, default 110C)Timeout protection (0 -100h adjustable, closed by default)Over-capacity protection (0 -60Ah adjustable, closed by default)Working frequency: 120KHZColour:Photo Color Material:plastic+metalSize:79mm x 43mm x 48mmPackage Contents:1 x Boost ConverterOnly the above package content, other are not included.Note: Light reflection and different displays may cause the color of the item in the a little different from the real thing. The measurement allowed error is +/- 1-3cm.