説明
Features
1、Support ASCII text and RTU dual protocol automatic identification, no user setting in required. 2、Wide range of power supply voltage between DC7~36V. 3、The meter can display 4 digit of serial port. 4、Large 0.56inch display area for only 4 digit ,more clear. 5、The baud rate can be 1200bps/2400bps/4800bps/9600bps/19200bps/38400bps/57600bps/119200bps.
Specification
Features:
Support ASCII text and RTU dual protocol automatic identification, no user setting in required.
The meter can display 4 digit of serial port.
Large 0.56inch display area for only 4 digit ,more clear.
The baud rate can be 1200bps/2400bps/4800bps/9600bps/19200bps/38400bps/57600bps/119200bps.
Specification:
Display Digit:4
Display Size:0.56inch
Display Color:Red
Current:30mA
Wiring Diagram:
V+ :Power positive
GND: Negative power supply
A: RS485 BUS A
B: RS485 BUS B (note the wiring sequence, first connect the power cable to confirm the module works normally and then connect the communication line)
Communication interface: non-isolated, 485 bus and GND terminal common ground. If there are multiple devices on the bus, be sure to connect the terminating resistor to the bus end device.
Baud Rate:
1200bps/2400bps/4800bps/9600bps/19200bps/38400bps/57600bps/119200bps
Size:79 x 43 x 21.5mm / 3.11 x 1.69 x 0.85in
Installation Size:76 x 39.2mm / 2.99 x 1.54in
Package List:
1 x Meter
Package List
-
Fruugo ID:
271672515-602234089
-
EAN:
9308869092626
製品安全情報
以下に概説するこの製品に固有の製品安全性情報を参照してください。
以下の情報は、この製品を販売する独立したサードパーティ小売業者によって提供されています。
製品安全ラベル
安全上の警告:
Please do not allow your child to handle this product alone to avoid swallowing or other injuries; adult supervision is recommended.
