Model Name:Cooler RadiatorOrigin:Mainland China support:Wholesale/dropshopping Feature: Applicable to most domestic scooters, other models such as GY6-125 can also be installed, as long as the oil dipstick (oil dipstick) screw diameter is 1.9cm, and the screw tooth thickness is sufficient. Description: Product Name: Motorcycle Oil Cooler Radiator Material: Stainless steel Process: electroplating Diameter: About 63mm Suitable models: suitable for most domestic scooter models, other models such as GY6-125 can also be installed, all kinds of men's cars, as long as the oil dipstick (oil dipstick) screw diameter is 1.9cm, thick screw teeth, you can see Install. Installation method: When installing, put the screw on the oil dipstick interface, and then fix the pipe body part with the screw. The height of the pipe body should be higher than the engine, otherwise oil may be sprayed out. Put the oil seal on the oil dipstick (black glue). ring) onto the radiator screws. Packing list: 1 set Motorcycle Oil Cooler Radiator Note: 1. Due to manual measurement, please allow 1-3cm error. Make sure you don't mind before bidding. 2. Due to the difference of different monitors, the picture may not reflect the actual color of the product. Thanks.