Features 1、Long Durability: The foot pressure sensor is composed of polyester film, high conductivity material, and nanoscale sensing material, which has superior pressure sensing, fast response, and long service life, as well as well comprehensive mechanical performance 2、Reasonable Layout: The bottom is flexible film and a conductive layer consistent with it, the top layer is flexible film and pressure sensitive material; The bottom and top layers are bonded by double sided tape, the sensing areas of the upper and lower layer are isolated 3、16 Sensing Areas: Featuring 16 independent sensing areas, when the sensing area is pressurized, the wires separated from the bottom layer are opened, and the output resistive value of the sensing area changes with pressure 4、Comfortable Design: The thin film foot pressure sensor has IP67 water and dust proof rating, no electromagnetic interference and electrostatic discharge; Human foot mechanics design, comfortable and flexible, you can use it with confidence 5、Wide Application: This pressure sensor insole is suitable for various foot sizes and has long lasting performance. It is widely suitable for step counting, stride, gait, motion detection, foot force analysis, and fall prevention warning application Specification Item Type: Foot Pressure Sensor Sensing Points: 16 Size: Approx. 253 x 76mm / 10 x 3in Applicable Sizes: 36, 38, 40, 41, 42, 44 Thickness: 0.4mm Type: Thin Sheet, Flexible Trigger Force: Approx. 500g /1.1lb Pressure Range: Approx. 0.5-10kg / 1.1-22lb, Soft Pressure Head Pressure Action Method: Soft Touch Press Not Activated Resistive Value: Greater than 10MΩ Activation Time: Less than 10mS Using Temperature: -20℃-65℃ Durability: Over 1 million times (normal walking, regular use) Resistive Range: About 50K-150KΩ Response Time: <10ms Water Proof: IP67 Dust Proof: IP67 Electromagnetic Interference EMI: None Electrostatic Discharge EDS: None Product Description: The flexible film foot pressure sensor has 16 independent sensing zones, and the output resistive value of the sensing zone changes with the change of external pressure. Reasonable sensing area layout, a total of 20 interface leads, using 1mm spacing, 10Pin, 0.3mm thickness plug interface. Among them, 2 are public lines, 16 are independent leads in the sensing area, and 2 are vacant lines. Package List 1 Pair Pressure Sensor (Left and Right Foot)