Installation Notes: Suitable for 10-inch drawers. The distance between the drawer and the cabinet wall needs to be 0.5 inches on the left and right, for a total of 1 inch (cabinet width - drawer outside width = 1 inch), sliding length: 10 inches (254mm) - fully extended length: 20" (508mm) .Quantity: 1 pair (2 pieces). Note: When installing, ensure that the two slide rails are parallel to each other, and ensure that the drawer partial slide rails and the cabinet partial slide rails are parallel and on the same level. Maximum Load Capacity: 100 lbs |: Slide rails are made of 1.5mm high-density cold-rolled steel plate, keeping drawers stable and secure even when carrying loads up to 100 lbs. Rust-proof and smooth working: Due to the special electrophoretic coating surface treatment, our slide rails have better rust-proof and oxidation resistance than other slide rails; built-in dual industrial-grade bearing balls, the drawer can slide smoothly even if it carries heavy objects; Equipped with rubber anti-vibration pads, wear-resistant and impact-resistant devices, the drawer slides quietly and without collision noise. Scope of application: This slide rail is suitable for all types of household drawers and office furniture. It can be applied to wardrobe drawers, keyboard drawers, cabinet drawers, wooden or steel drawers, toolbox drawers and other drawers with large load-bearing requirements.