1*0.3m Portable Photosensitive Dry Film for Circuit Photoresist Sheet for Producing PCB Board

¥1,649
配送料無料

1*0.3m Portable Photosensitive Dry Film for Circuit Photoresist Sheet for Producing PCB Board

  • ブランド: Unbranded

1*0.3m Portable Photosensitive Dry Film for Circuit Photoresist Sheet for Producing PCB Board

  • ブランド: Unbranded
希望小売価格: ¥2,149
価格: ¥1,649
得する金額: ¥500 (23%)
販売元:
¥1,649
配送料無料

在庫あり

以下の支払い方法を利用することができます

説明

Features:1. Universal used in producing PCB board, attach on the PCB surface to make it photosensitive.2. Suitable for electroplating, hole covering and etching.3. Great hole covering ability4. Great adaptive capacity to different material.5. Suitable for usual plating bath, no wrinkle or color error.Specification:Condition: 100% Brand NewWeight: Approx. 55g / 1.9ozSize: Approx. 1 * 0.3m / 3.3 * 1.0ftPackage List:1 * Photosensitive Dry FilmOperating Steps:1. Uncover the film, the photosensitive film is sandwiched between the two layers of film, first tear off one side, a little difficult to tear, try a few more2. Then film, the copper plate can be slightly cleaned, flattened, try not to have bubbles3. After the paste, the iron is slightly heated, not too hot, to fix4. Print circuit board film, it is recommended to use film, you can achieve the highest fineness, if you do not require precision with sulfuric acid paper to print.5. Exposure, put the printed pattern on the photosensitive plate, use ordinary energy-saving lamps for about 30 minutes, if there is an exposure machine for 1 minute, the sun has not been tried, it should be about 15 minutes, the exposure process is obvious, because the photosensitive The film changes color when exposed, and changes from light to dark blue. You will easily see your circuit diagram appear on the board.6. Develop, remove another protective film, put it into the developer (developer is 1:100 water, 10 grams of water, 1 liter of water), and use a cotton swab to wipe the board with a little force during development.7. Etching, this needless to say etchant water saturated solution8. After etching, remove the film, remove the film by 1:60 or 70, and soak the board for a few minutes.
  • Fruugo ID: 419714955-884546704
  • EAN: 7890797784886

製品安全情報

以下に概説するこの製品に固有の製品安全性情報を参照してください。

以下の情報は、この製品を販売する独立したサードパーティ小売業者によって提供されています。

製品安全ラベル

CE Mark
安全上の警告: Warning: Please read the product instructions carefully before use to ensure correct use.
シリアルナンバー: 7890797784886

配送と返品

2日間以内に発送

  • STANDARD: 無料 - 間の配達 木 23 10月 2025–木 30 10月 2025 - 無料

中国より発送。

ご注文の商品は、お客様の仕様に従い、万全の状態で配送されるように最善を尽くしています。しかし、もし注文に抜けがあったり、注文したものと違う商品が届いたり、注文に満足できないその他の理由がある場合は、注文全体やその中のいずれかの商品を返品し、その全額の返金を受けることができます。 全額返金ポリシーを見る

製品コンプライアンスの詳細

以下に概説されているこの製品に固有のコンプライアンス情報を参照してください。

以下の情報は、この製品を販売する独立したサードパーティ小売業者によって提供されています。

製造業者:
次の情報は、Fruugoで販売される関連製品の製造業者の連絡先詳細です。

  • Shenzhen Gujun Technology Co., Ltd.
  • Shenzhen Gujun Technology Co., Ltd.
  • 1303, 13/F, Tower B, TCL Building, No. 6 Gaoxin Nandao Road, Yuehai Street
  • Nanshan District
  • Shenzhen
  • Guangdong
  • CN
  • 518067
  • idyaiy16984@163.com
  • 13038870349
  • https://hengruigongju.1688.com/page/index.html?spm=0.0.wp_pc_common_header_companyName_undefined.0

EUにおける責任者:
次の情報は、EUにおける責任者の連絡先情報の概要です。ここで言う責任者とはEUに拠点を置く指定経済事業者で、EU域内で販売される関連製品に関するコンプライアンス義務を負う者のことです。

  • None
  • Kequ Technology s.r.o.
  • Pražákova 1008/69
  • Štýřice
  • Jihomoravský kraj
  • Brno
  • CZ
  • 63900
  • christopher25106@outlook.com
  • 420608214795
  • https://www.ozon.ru/seller/topstore-600244/products/?miniapp=seller_600244&__rr=1&abt_att=1