1 Set Guitar Bridge Pins Puller Pulling Remover Extractor Tool & 1 Set Guitar String Tuning Key Pegs/Machine Head Knobs

How to Replace Guitar Saddle Take the pins, strings, saddle out in order; Check the saddle's thickness, polish the saddle if it is thicker; Make sure that saddle will not fall off when the guitar is reversed; Mark the position on the guitar bridge; Check the saddle height, polish the saddle if it is higher; Make sure the right gap, recommended height of string is about: LowE= 0.125 inch (3mm), HighE= 0.08 inch (2mm). How to Replace Guitar Nut Clean the nut and guitar neck with a knife or tool; Kick the nut off the neck with a hammer or screwdriver; Pull the nut out with a tweezer; Check the nut's thickness, polish the nut if it is thicker; Put nut in slot, recommended space is about: LowE= 0.01 inch (0.25mm), HighE= 0.005 inch (0.15mm); Mark the redundant length of nut, and polish them off. Colour: Black + silver + gray white Material:Metal+ABS Great compatibility: fits for almost all balladry and electric guitars Durable: with tough internal gear Provides finer tuning and greater stability Package Contents: 1 x guitar bridge pin puller 2 x guitar saddle 2 x guitar nut 6 x ivory guitar bridge pins 6 x black guitar bridge pins 3 * Left chord button 3 * right chord button Only the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.