Features: 1. Function: Rust, corrosion, and oxidation prevent, lubrication, moisturizing. 2. Scope of application: door window lubrication, wheel hub lubrication and rust prevention, car rust parts, rust removal, etc. 3. Easy operation and instant anti-rust effect. 4. Fume-less, non-flammable, low VOC, water-based . Direction: 1. Preparation: Remove larger rust and scale particles with a wire brush or sandpaper. Thoroughly clean surfaces to remove dirt, dust, and grease. 2. Application: Shake or stir well before use. Apply two coats with a brush, roller, or pump spray, allowing at least 20 minutes to dry between coats. A 48-hour is required before the paint can be applied. 3. Clean-up: The equipment should be cleaned immediately with soap and water. 4. Do not use this product if the temperature is below 50F. Store in a cool, dry place to prevent freezing or temperatures exceeding 100F. For long-term protection of the iron surfaces, the cured anti-rust coating should be sealed with two coats of high-quality oil-based paint. No other primer is required. Specification: Net Volume: 100ml Storage methods: Store in a cool dry place Application: Rust removal Weight: about 133g Approximate size: brush: 9.9*1.5cm/3.89*0.59in; bottle: 12*4cm/4.72*1.57inch Packing List: 1* Rust Converter