100W Hot Melt Glue Gun Stick Electric High Temperature Heating DIY Hand Tool 100‑240V Condition: Item Type: Hot Melt Glue Gun Material: Plastic, Aluminum Nozzle Material: Aluminum Color: As Picture Shown Power: 100W Glue Spitting Frequency: 10 (times/min)Frequency: 50-60HZ Indicator Light: LED Glue Stick Diameter: Approx. 10.5-11.5mm/0.4-0.5inFeatures: 1. This product adopts high-tech PTC thermistor as heating elements, with fast heating speed and accurate constant temperature. Usage:1. This series of products can be applied to strips with a diameter of 10.5-11.5mm/0.4-0.5in (NOT Included). 2. Insert the glue strip from the end of the tool and send it to the barrel. After plugging in the power source to preheat for 1 minute, pull the trigger can extrude the glue and the amount of glue can be made under control 3. In the process of use, if one glue strip can not use up at one time, the glue strip need not be taken out, and can be plugged in for preheating for 1 minute before direct use when you need e again.