Features:* Made of high-quality material, durable and practical to use.* It can be cured quickly, can be used on inert surface, and has good oil solubility. It is easy to disassemble and can be used on a slightly high-quality dirty work surface. Can be used to lock and seal threads below M20.* The normal loosening torque can be increased by approximately 25% to prevent loosening and leakage caused by impact and vibration.* Even if industrial oils such as electric motor, anti-corrosion oil and cutting fluid cause slight surface contamination, can be firmly bonded.* The product is blue and fluorescent under ultraviolet light, which can judge whether the product has been covered with parts.* Pre-treatment: clean the surface of the assembly parts to ensure there are no residual oil stains, stains oils, engine oil and anti-corrosion oil. Difficult to bond substrate, pre-treated with accelerator.* Degumming: spilled colloid has not solidified and can be removed.* Accelerator: used together with accelerator 7649 and 7471, can effectively shorten the curing time. Technical data: Chemical type: methacrylate Appearance (uncured): blue liquid Fluorescence: fluorescent Composition: single component - no mixing required Viscosity: medium viscosity, thixotropy Curing mode: in anaerobic conditions Application: for thread locking Strength: medium strength Validity: 2 years Capacity: 10ml Quantity: 1pc Package includes: 1 pieces 10ml thread lock 243