SET OF 10 HYDROGEL ELECTRODES electrodes for TENS/EMS electrostimulators (BEURER, SANITAS, ML-2020A, JR-309A, AS-2016) electrodes coated with biocompatible hydrogel electrodes self-adhesive Reusable electrodes electrodes with dimensions 9 cm x 6 cm electrodes on the hook-up type "Button" (Snap) The dimensions of the hydrogel electrode are 9 x 6 cm. Electrodes fit tens and ems electrostimulators: Medica Laboratories ML-2020A AS -2016 Sanitas : SEM36 SEM40 SEM41 SEM42 SEM43 SEM44 Beurer : EM40 EM41 EM49 EM80 The offered electrodes are also suitable for all TENS/EMS electrostimulators that have a "SNAM 3,5 mm" connection reusable electrodes are covered with biocompatible hydrogel, which does not allow na too fast drying of electrodes, which extends their service life HOW TO CARE FOR ELECTRODES TO EXTEND THEIR LIFESPAN Each hydrogel electrode is equipped with a protective film. Do not throw away the protective film from the new electrodes so that after the procedure you can apply them again on the electrodes. Do not glue unprotected electrodes together. If they are glued together, re-unraveling can completely damage the electrodes, electrodes are not suitable for disinfection (each person using an electrostimulator should have their own electrodes), use a skin degreasing agent so that the electrodes do not lose their adhesion, and then stick them on cleansed dry skin (the skin should not have cuts, dermatological changes) If the electrode loses its stickiness, wash it gently with water to remove dust, epidermis. SET CONTAINS 10 PIECES OF HYDROGEL ELECTRODES Packed in 2 pieces (1 pair) for string bag. Total of 5 pairs included.