115/230DR10AL-02 10A DC Motor Speed Controller 115/230DR10AL-02 10A DC Motor Speed Controller Product Description Product characteristics: ■SMT technology, small size ■Good following features, rapid respond speed ■Wide speed ratio, strong mechanical features ■Applicable to permanent magnet , DC torque motor ■Double closed-loop PI regulation (Voltage, current) ■Current setting and current-limiting protection (continuous operation setting current) ■Large low speed output moment ■Over-current protection function ■Quick stop function ■Arbitrary setting of upper and lower speed ■Soft start, soft stop setting function■Selection of speed mode, torque mode ■Normally open, close selection of enable signal ■Selection of input, output voltage switch ■Driver speed governing controlled by standard signal input 0-5V or 10K potentiometer Specification Input voltage AC: 115V/230V±10% (other voltages can be customized as customer’s requirements) Frequency: 50/60HZ±5% Output voltage DC: 0~90V 0-110V 0-160V 0-180V 0-220V (can be set) Rated output current: 10A Revolving speed ratio: ≤0.1% Environment temperature: -10℃～+60℃ Insulation voltage resistance: 1500V AC Insulation resistance: >500MΩ Environment humidity: relative humidity ≤65% (no moisture condensation) Packing & Delivery