Color: Random color, do not accept designation Material: Composite material Note: Smoke generator heating wire is 6V, blower voltage is 6V. It may be damaged if voltage exceeds 6V. A voltage reduction board must be used if input voltage exceeds 6V. Compatible with 6.0S and 6.1S main boards (160A, with 160A marking on the shell). For 5.3S, 6.0S, and 6.1S main boards without the 160A marking, a voltage reduction board must be used. Connect the heating wire to the voltage reduction board (default output is 6V). Connect the heating wire and blower motor in parallel to the voltage reduction board OUT +-. Connect the IN+- terminals to the smoke generator port on the main board. Blower current is approximately 0.3A, heating wire requires approximately 1.2A. Package Contents: 1 x Smoke Generator Note: Light reflection and display differences may cause slight variations in color between the image and actual item. Measurement error is +/- 1-3 cm.