Clock movement: high torque clock movement with hook, long shaft, drive long clock hands (10 mm to 450 mm) Total shaft length: 28 mm (1-1/10 inches), thread length: 15.4 mm (3/5 inches), suitable for 9-13 mm (9/25-1/2 inches) thickness clock panel Size from the center of the hole to the tip: the hour hand is . 203 mm/8.0 inches long; The minute hand is about 305 mm/12 inches in length; Note: please check the size before buying Good DIY clock supply: suitable for repairing, replacing the broken parts of a clock or serving as good handwork materials to make a clock by yourself Warm notice: there are some clock parts made of aluminum, please do not install them with too much pressure or they be bent colour: black + gold Material: plastic + aluminum Size: Movement: 56x56x16.2mm Package Contents: 2 x Quartz clock movement 2 x Close nuts 2 x Minute hand 2 x Hour hand 2 x Plastic washer 2 x Brass washer 2 x Brass nut 2 x Metal hook Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.