specification:Item Type: 12 Gang Switch Panel_x000D_Material: Plastic + Metal_x000D_Backlight: RGB Style_x000D_Light Source Type: LED_x000D_Protection Class: IP65_x000D_DC Voltage: 12V-24V DC_x000D_Maximum Current: 85A_x000D_Power: 960W/12V, 1920W/24V_x000D_Operating Temperature: - 40 - + 85 _x000D_Applicable: Such as trucks, ships, offroad, power sports, ships, atv, utv, suv, cars, buses, heavy duty vehicle etc._x000D_RGB Function Introduction:_x000D_Switch: Switch with memory function, automatically remember the last setting_x000D_Backlight brightness adjustment_x000D_Short press: 5 levels of brightness adjustment (100%, 75%, 50%, 25%, 10%). With each press, the brightness switches to a different level._x000D_Long press: to enter setting mode, choose between momentary mode and strobe mode. Long press again to exit setting mode._x000D_Backlight color adjustment_x000D_Short press: switch to single color (loops from 1-8 in order)_x000D_1. Red 2. Orange 3. Yellow 4. Green 5. Cyan 6. Blue 7. Purple 8. White_x000D_Long press: gradual change, jump, breath switch (cycle 9-11 in sequence)_x000D_9. gradual change: red orange yellow green cyan blue violet_x000D_10. Jump: red orange yellow green cyan purple_x000D_11. Breathing: Red Orange Yellow Green Blue Blue Purple_x000D_3 lighting modes_x000D_Constant light, instantaneous mode, strobo mode, adjust at will_x000D_Step 1: Press and hold the brightness adjustment button for 1 second. When the red backlight flashes, enter the momentary setting state_x000D_Step 2: Press the button you want to set (the instantaneous mode can be selected between 12 buttons), then press the ON OFF button to confirm, and the setting is successful._x000D_Step 3: Press the ON OFF button again to exit the setup mode._x000D_Strobe mode_x000D_Step 1: Press and hold the brightness adjustment button for 1 second, and the red backlight will flash (Note: This is the instantaneous setting state, please refer to the specific steps)._x000D_Step 2: Then short press the brightness adjustment button, and when the blue backlight flashes, enter the strobo setting state._x000D_Step 3: Press the button you want to set (the strobe mode can be selected among 12 buttons), and then press the ON OFF button to confirm, the setting is successful at this time._x000D_Step 4: Press the ON OFF button again to exit the setup mode. Features: 1Sturdy Construction: Made from CNC machined aluminum, this car switch panel is built to last and can stand up to impacts and wear and tear. 2Waterproof and Dustproof: With an IP65 rating, this switch panel is fully protected against rain and debris, ensuring reliable operation in any environment. 3Long Lifespan: The plastic housing is designed with space on both sides to help expel heat and keep the controller working efficiently, with a lifespan of up to 30,000 hours. 4ON OFF Button: A red button is designed on the left side of the switch panel to open and close the system with one key; Take the unexpected in stride. 5Versatile Compatibility: This switch panel is small enough to fit on dashboards, center consoles, and even sun visors, perfect choice for trucks, boats, SUVs, ATVs, cars and more. PackageList:1 x_x000D__x000D_12GangSwitchPanel 1 x Circuit Breaker 1 x Reset Switch 10 x Cable Ties 1 x Manual 3 x Wiring Harness 5 x Bracket 1 x Function Sticker 1 x Pack of Accessories (29PCS)