Rubber Tires for 12" Band Saw Scroll Wheel - 2PCS Woodworking Replacement Parts 2 Pieces Band Saw Rubber Tire Band Woodworking Spare Parts For 12 Inch Band Saw Scroll Wheel How To Replace a Band Saw Tire? 1. Unplug the band saw, loosen the saw blade tension and remove the blade. Then remove the band saw wheel. 2. Once removed, completely remove or cut the old tire and any residue left behind. 3. Slide part of the tire onto the wheel rim, then slip a short rod or pipe between the tire and wheel. Roll the pipe around the rim once to equalize the tire's elasticity. 4. Squeeze a small amount of glue onto a brush and apply it to the tire and wheel surface. Roll and repeat all the way around the rim. Let the glue dry for 24 hours before using the saw again. Diameter: for 12 inch (305mm) bandsaw wheel Compatible with LB1200F, Charnwood W721, Craftsman, Jet, Grizzly band saws using 2240mm bandsaw blades Color: black Material: rubber Size: approximately 20mm wide x 3mm thick Package Contents: 2 x Band Saw Rubber Tire Note: Light and different display settings may cause slight variations in the color of the item in the picture compared to the actual item. Measurement may vary by +/- 1-3cm.