How To Replace a Band Saw Tire? 1. Unplug the band saw, loosen the saw blade tension, and remove the blade. Then remove the band saw wheel. 2. Once removed, completely remove or cut the old tire and any residue left behind. 3. Position part of the new tire onto the wheel rim, then insert a short rod or pipe between the tire and wheel. Roll the pipe around the rim once to equalize the tire's elasticity. 4. Apply a small amount of glue using a brush to both the tire and wheel surface. Roll and repeat all the way around the rim. Allow the glue to dry for 24 hours before using the saw again. Diameter: 12 inch (305mm) bandsaw wheel Compatible with models using 2240mm bandsaw blades Color: Black Material: Rubber Size: Approximately 20mm wide x 3mm thick Package Contents: 2 x Band Saw Rubber Tire Note: Light and display differences may cause slight variations in color. Measurement error is +/- 1-3cm.