Material: FEP film sheet is heat resistant up to 204°C, featuring a non-stick and non-scratch surface, UV stable, and durable for long-term use Wide compatibility: Compatible with Photon, Wanhao UV, Mini Deluxe, Mars LCD, and other 3D printers with the same size frame, meeting a wide range of usage needs Performance: The 3D FEP film offers high transmittance, strength, UV resistance, and clarity, capable of withstanding prolonged high temperatures from UV 3D printer operation, allowing over 95% of UV light to pass through without interference Both sides of the FEP film are protected with a removable film; remove the protective layer before use. Regularly replacing the plastic spatula helps prevent damage to the FEP sheet when installed at the bottom of the resin vat. Do not use metal spatulas or tools on the film Easy to install: 1. Remove the screws to detach the steel rings from the resin vat. 2. Remove the remaining screws to separate the steel ring and replace the film. 3. Place the new FEP film between the steel rings and reinstall the screws, ensuring they are tightly secured. 4. Reattach the steel rings to the resin vat, ensuring the FEP film is clean and properly tensioned Specifications: Color: Transparent + yellow Material: FEP + plastic Size: 200 x 140 x 0.15 mm Thickness: 0.15 - 0.2 mm Package Contents: 12 x FEP films 2 x Plastic spatulas Only the above package content is included; other items are not included Note: Lighting and display differences may cause slight color variations between the image and the actual item. Measurement error is +/- 1-3 cm