Description: This product is a great useful tool for DIY lipstick, you can make your own lipstick. Made of aluminum alloy, durable and safe to use. High gloss and accurate grinding, easy to throw away lipstick. Fewer parts, convenient to carry. Features: 1. Professional DIY lipstick, easy to operate. 2. You can modulate the colors you like, ensuring the safety of the ingredients. 3. Made of aluminum alloy, durable and safe to use. 4. High gloss and accurate grinding, easy to throw away lipstick. 5. Fewer parts, convenient to carry. 6. Double use of mold, you can create different lipsticks that you like. 7. Fine polished oxygenating aluminum, easy to clean. Specification: Item Type: DIY Lipstick Mold Type: 6 Holes Color: Rose Gold Material: Aluminum Alloy Size: Approx.7 * 4.3 * 2.3cm / 2.7 * 1.6 * 0.9inch, 11 * 4.3 * 2.5cm / 4.3 * 1.6 * 0.9inch, 16 * 4.3 * 2.3cm / 6.2 * 1.6 * 0.9inch Package Weight: Approximately 172-406g The package includes: 1 x DIY Lipstick Mold Note: The correct process of lipstick production: 1. Combine upper and lower form 2. Heat the ingredients proportionally until they dissolve completely. 3. Pour the lipstick solution into the mold opening, let stand for more than 30 minutes or put in the refrigerator for a better cooling effect (20 minutes). 4. After the lipstick has hardened, clean the spilled lipstick, then gently remove the top cover, making sure the lipstick strip is in the bottom form without pulling out the top cover. ) 5. Turn the lipstick tube up, press it against the lipstick strip, press down until the bottom touches the mold, then pull it out in parallel. Formula 2 moisturizing lipsticks: 4 grams of beeswax, 12 grams of olive oil, 1,25 grams of tonic, vitamin E, vitamin E essence, etc. The proportion of self-added basic wax oil should be controlled at 1:3 . Replace the beeswax. Special Instructions: Be sure to master the temperature, dosage of the formula and procedures before and after production. If the temperature is too low, horizontal lines will appear. If the temperature is too high, blisters, cracks or small holes may appear. When creating two-tone lipsticks, you need to pay more attention. Tip: when it is hot, ready prod