_x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ Handheld 125KHz RFID Copier ID Reader Writer Access Control Card Duplicator Cloner Encryption Card Writer Smart Key Copier _x000D_ Description: _x000D_ ID (em4100) access control card copy/copier adopts Mini handheld mold, which is ergonomic and easy to carry; _x000D_ Using Silicon Labs international advanced chip manufacturer chips, all work is done by this chip, the product is more integrated, more stable and reliable; _x000D_ Adopt excellent program algorithm and circuit design to reduce power consumption and extend battery life; _x000D_ It adopts the design of read key and write key, which is more convenient to operate; all ID (em4100) cards can be copied for multiple purposes. _x000D_ _x000D_ Specification: _x000D_ Product size: 117*70*30mm/4.6*2.75*1.2in _x000D_ Product weight: 80g _x000D_ Packing size: 163*86*36mm/6.4*3.4*1.4in _x000D_ Package weight: 151g _x000D_ Frequency: 125kHz _x000D_ Power supply: 2 x AAA batteries, which can be copied 20000 times _x000D_ Distance: The read-write distance of the keychain can reach 2.5cm, and the card can reach 6cm. _x000D_ Card: t5577\ em4305\cet5200 and all t5577, em4305 compatible cards use _x000D_ Model: No Accessories, 5-Card, 10 Keychain _x000D_ _x000D_ Instruction: _x000D_ 1. Start the copy machine _x000D_ Push the switch on the right side of the copy machine upwards, the red light is always on, the green light and yellow light flash once, and the buzzer sounds once, which means the startup is successful, otherwise it can be restarted once. _x000D_ When the duplicator starts, there is no card reading at this time, and then press the right key of the duplicator to write the card, you can write an ID card with all 0s. After the writing is successful, the buzzer will sound 2 times. _x000D_ _x000D_ 2. Copy ID _x000D_ Push the switch on the right side of the copying machine upwards, the copying machine will beep, the green light and yellow light will flash once, indicating that the startup is successful; _x000D_ First put the old card on the left side of the copy machine, press the left button of the copy machine to read the card, the card reader drops 2 to indicate that the card is read successfully, and the green light is on at the same time; _x000D_ For a new card, press the right button of the copy machine to write to the card. _x000D_ The reader beeps twice to indicate that the card is written successfully, and the yellow light is on at the same time. _x000D_ The clone card is completed. _x000D_ _x000D_ Tips: _x000D_ Battery is not included. _x000D_ This product can be equipped with 5 cards, 5 buckles and 10 buckles accessories. _x000D_ _x000D_ Note: _x000D_ Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you! _x000D_ Please allow 1-2cm measuring deviation due to manual measurement. _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ 1 X RFID Duplicator _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_