7463 gland wrench --- Suitable for hydraulic cylinders on vehicles with small gland nuts with a diameter of 1 inch to 3 - 3/4 inch. Fully adjustable and can be reversed to use pinholes with a diameter of 1/4inch or 7/32inch. Fully adjustable and work with 1/2 inch drive ratchet. 1266 gland wrench --- Fits gland nuts with a diameter of 2 - 6 inches and is reversible to fit pinholes with a diameter of 1/4 or 5/16 inches. Fully adjustable and works with a 3/4inch drive ratchet. Easy to use: By adjusting the spacing of both pins, the pin is aligned with the hole and then worked with the required crowbar to loosen and remove the gland nut. This work is done only with some patience.Hydraulic cylinder seal kit tool for installing internal seals for external retaining rings commonly found on cylinders. Using a hydraulic tool helps reduce the chance of installation damage. Hydraulic cylinder seal kit tool, using high-quality metal, corrosion-resistant, wear-resistant. And the surface will not cause damage to the seals. It is very easy to use, only two steps are needed. And with the hydraulic cylinder sealing tool, you can quickly complete the installation of the seal and it doesn't take a lot of effort. Hydraulic cylinder seal kit. You will receive three different sizes of tools for different sizes of seals after your purchase. Compact size, convenient to carry. [Size]L:70-165MM (2.75inch - 6.49inch ROD); M:40-70MM (1.57inch - 2.75inch ROD); S:22-40mm(0.87inch - 1.57inch ROD) Color: Black & Silver Material: metal Package Contents: 3 x Hydraulic U-Cup Seal Twistor Installation Tool 1 x 1266 Adjustable Garning Socket Wrench 1 x 7463 Small Adjustable Garning Socket Wrench 2 x small Wrench (Random color, 't accept the specified color.) Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.