Specifications:Made of cloth material, the heating grip cover is wear-resistant, successfully after 8000 wear tests.The built-in chip can intelligently control the 3-stage temperature, which is safer.It can heat up fast and evenly within 10 seconds.The heating gasket is fixed by a sticker which is easy and quick to install.With the high waterproof level of IP67, it can be soaked in the water to clean after unplugging it. Item Name: Heating Gasket CoverMaterial: Composite Fiber Heating Wire, Wear-resistant Cloth, Stainless SteelInput Voltage: DC12VWorking Temperature: Minus 30 Degrees Celsius - 100 Degrees CelsiusPower Stage: Low Stage-10W, Moderate Stage-15W, High Stage- 20WInstallation Method: First Make the Sticker Affixed on the Right-angled Bracket outside Surface(the Side without Hole), Attach the Switch to the Sticker, and then Fix the Right-angled Bracket at the Rear Mirror Base through the Hole.Wiring Instruction: the Red Wire to the Positive Pole, the Black Wire to the Negative PoleOperation Instruction: Power on, Red Light, Blue Light, and Green Light Each Flash Once and then Go out.Standby: The Red Light Keeps Flashing, and It Will Automatically Turn Into A Blue Light When the Temperature Reaches A Certain Degree.Working Model: The Indicator Light Is Always On (High-power: Red Light, Mid-power: Blue Light, Low-power: Green Light)Switch Power: Click the Switch to Switch the Power Stage.Features: Waterproof, Intelligent Temperature Control, PracticalSize of the Electric Heated Gasket: 12.8cm x 10cm/5.04 x 3.94 (Approx.)Cable Length:Length of the Heating Gasket to Switch: 108cm/42.52 (Approx.)Length of the Switch to Electric Lock: 146cm/57.48 (Approx.)Note:When the positive and negative poles are connected reversely, the switch cannot be used, and the heating element directly heats.Please select the appropriate temperature and power according to the ambient temperature.Under low-temperature conditions, if the temperature of the electric heating grip cover cannot be sensed in time due to the numbness of the hand, please use the low or medium stage first to prevent high-temperature burns.This product is only suitable for motorcycles with a 12V battery. Please read the installation diagram carefully before installation. Incorrect wiring will cause damage to the components.This product can only be installed on the handlebars of motorcycles when it is energized. You can use a battery to test whether the product is properly energized before installation.It is strictly forbidden to energize and work when not riding (empty burn) to prevent overheating of the electric handle cover and damage to the original handlebar.It is recommended to connect the electric door lock wire to the wiring. Most models have a black positive pole and a green negative pole. For specific conditions, it is recommended to use a multimeter to measure.Due to the light and screen setting difference, the items color may be slightly different from the pictures.Please allow slight dimension differences due to different manual measurements.Package Includes:1 x Switch1 x Heating Gasket Cover1 x Sticker1 x Right-angle Bracket5 x Binding Tapes