Name: Silicone Engine Pan Heater Plate PadCable Length: 35cmVoltage: 12VPower: 100WTemperature: Constant temperature 40, 60, 80, 100, 120, 150Instructions for use:1. The insulating layer of the silicon rubber electric heating sheet is composed of silicon rubber and glass fiber cloth, which has high insulation performance, and the breakdown voltage can reach 20-50KV/mm, so it can be used with .2. When using this type of electric heating piece, it must be that continuous working temperature should be less than 240, and the instantaneous temperature should not 250.3. The silicone electric heating piece can work and be pressed, that is, the auxiliary pressure plate is used to to the heated surface. The heat conduction is good, and the current density can reach 3W/c when the temperature in the working area does not 240.4. The allowable working temperature is less than 150 under the condition of pasting installation5. The working voltage is based on the principle of -high voltage, low power-low voltage, and needs can be listed.6. Moisture-proof and -proof silicon rubber material provides heater life.7. Scope of application: all kinds of automobile fuel tanks, water tanks, batteries, antifreeze heating and heat preservation.colour: orangeMaterial: siliconeSize: 13x23CMPackage Contents:1 x OIL tank heating padOnly the above package content, other products are not included.Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.