Motion Sensor Light Switch A compact PIR motion sensor switch designed to automate DC lighting systems. Detects movement and switches a connected 12 to 24 V load on for a user adjustable time, simplifying lighting control in utility areas and improving convenience. Key benefits Hands lighting: Automatically turns lights on when motion is detected and off after the preset delay, reducing manual switching. Energy and convenience: Limits unnecessary run time of DC lighting by using an adjustable timer from 1 to 10 minutes. Broad compatibility: Works with DC 12 V to 24 V lighting systems and other 12 V to 24 V loads up to 6 A. Reliable detection: PIR sensor with a detection range up to 5 to 8 meters and a 60 degree sensing angle for focused coverage. Main features and specifications Type: PIR switch for passive infrared motion detection Rated voltage: DC 12 V to 24 V (input and output) Maximum load current: 6 A (output current less than 6 A) Detection distance: adjustable, approximately 5 to 8 m Detection angle: 60 degrees Delay time: adjustable from 1 to 10 minutes Working temperature range: 20 to 60 C Output mirrors input voltage for direct compatibility with 12 V to 24 V systems Package contents 2 x Motion Sensor Switch Installation and use Connect the load cable first, then connect the power cable. This sequence reduces the risk of short circuits during wiring. Set the delay time to match desired lighting duration between 1 and 10 minutes. Position the sensor so the expected motion path lies within the 60 degree detection cone and within the 5 to 8 m sensing distance. Designed for DC lighting loads; ensure total connected current does not exceed 6 A. Practical applications Undercabinet or pantry lighting: Automatic activation when you enter the area, with timed shutoff to avoid leaving lights on. Garage and storage rooms: Hands illumination when carrying items or working, then automatic turn off after the preset delay. Corridors and aisles: Zone automatic lighting for short passages or lowtraffic areas where lights should only be on when needed. Performance notes Sensor sensitivity and delay time are adjustable to suit different environments and traffic patterns. Operates within a wide ambient temperature range for use in unheated utility spaces and typical indoor environments. This motion sensor switch is a straightforward solution for automating 12 V to 24 V lighting circuits where motionactivated control and adjustable timing are required.