Winch Rocker Switch Control Line for ATV/UTV. For use with 1,500lb-6,000lb ATV/UTV/SxS winches. Control Wire Length: Approximately 10 ft. 12V industry ATV/UTV contactor/solenoid/relay that requires auxiliary power and two control wires. Splicing of wires may be required depending on the connectors found on the customer's current contactor/solenoid. High quality and durable connector. Full sealed long lasting control switch. Low temperature resistance. Easy to installation Replacement Contactor for the following Winches: Compatible with KFI: ST17, S2000, A2500, A3000, U4500, U4500w, SE25, SE35, SE45; Compatible with: A2000, A2500, U2500, 1.5ci, 2.5ci, 2.5ce, 3.0ci, 3.0ce, 3.0s; Compatible with: RT15, RT25, RT30, XT15, XT25, XT30, RT40, XT40; Compatible with: Vantage 2000-3000lbs, Provantage 2500-3500lbsl; Compatible with: Vantage 4000lbs, Provantage 4500lbs Compatible with RAMSEY: ATV2500, ATV3000 Compatible with SUPERWINCH: Terra25, Terra35, Terra 45, LT2000, LT2500, LT3000 Compatible with : PE2.5, PE 3.5, VMX2.5, PE2000, PE3000, PE2500, PE3500 Compatible with : 1500lbs #2955AT Compatible with : Work Power 1500 and 2500, 2500 and 3500 Compatible with BADLAND: 2000lb #68146 / 3000lb #68145, 5000lb #68144 Compatible with : C10013, C10014, C10018, 10020, 10024, 12053, 12503, 13501(requires rollers), 14061 : 14501, 14551, 14552, 40252 (4500lbs) (Requires purchase of correct Roller Fairlead Bracket KFI #100695) Compatible with : 10028, 10032, 12001, 12002, 13001, 20049, 20051, 20249, 30045, 30145 Compatible with : 14001 and 14061 Compatible with KEEPER CORP. : KT2500, KT3000, KT2500C, KT3000C, KT4000, KT4000C , KT2000 Compatible with : XRC 2.0 / XRC 3.0 : X3000, X4000 Compatible with : 2000, 2500, 3000, 3500, 4000, 4500, 5000 ( Series) Product description Color: Black Material: plastic Package Contents: 1 * Rocker switch Only the above package content, other products are not included. Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.