Product overview A compact motion sensor light switch designed for automatic control of LED lighting in indoor and outdoor settings. The unit provides adjustable detection range, adjustable delay timer, a wide 180 degree sensing angle, and selectable day or night working modes. It is rated IP54 for protection against dust and splashing water and supports LED loads up to 30 W on a DC 12 V supply. Key benefits Automatic on and off control reduces manual switching and provides hands lighting when motion is detected. Adjustable detection distance and delay time allow you to tailor sensing and run time to each installation, reducing unnecessary operation. Day and night mode selection lets the sensor operate only when ambient light is low or operate continuously regardless of light level, giving flexibility for different applications. Compact, weather resistant design makes the sensor suitable for many indoor and outdoor LED fixtures where a small footprint is required. Main features Operating voltage: DC 12 V Detection distance: adjustable from 5 to 11 m Detection angle: 180 degrees Delay time: adjustable from 5 seconds to 8 minutes Light output compatibility: supports LED lamps up to 30 W Protection rating: IP54, suitable for sheltered outdoor locations Day and night settings: sun position for operation regardless of ambient light; moon position for operation only when illumination is low or at night Compact mini form factor suitable for integration with many LED fixtures Why customers need this sensor Improves safety and convenience by turning lights on automatically when people enter an area. Helps avoid leaving lights on unnecessarily by using an adjustable timer and light sensing mode. Works with lowvoltage DC 12 V LED systems and small LED fixtures up to 30 W, making it suitable for a range of retrofit and installations. Typical applications Garage or carport lighting: sensor activates LED fixtures when a vehicle or person approaches, and switches off after the selected delay. Corridor and stairwell lighting in schools or commercial buildings: automatic control provides lighting only when areas are occupied. Outdoor walkways, parking lot perimeters, and park paths: IP54 protection allows use in sheltered outdoor mounting to provide on demand lighting at night. What to check before installation Confirm your LED fixture is powered by DC 12 V and does not exceed 30 W. Select the appropriate detection distance and delay time for the space. Choose sun mode to have the sensor respond regardless of ambient light, or choose moon mode to have the sensor operate only when illumination is low or at night. This motion sensor light switch offers reliable automatic control for lowvoltage LED lighting with adjustable settings for range, timing, and ambient light response, suited to a variety of indoor and sheltered outdoor lighting needs.