1.3inch LCD Display Module For PicoEmbedded ST7789 Driver, Using SPI BusFor Pico Header CompatibilityOnboard Female Pin Header For Direct Attaching To Pico1x Joystick And 4x Buttons For Easy InteractingOperating voltage: 2.6~5.5VResolution: 240x240 pixelsCommunication interface: 4-wire SPIDisplay size: 23.40 x 23.40mmDisplay panel: IPSPixel size: 0.0975 x 0.0975mmDriver: ST7789Dimensions: 52.00 x 26.50mmLCD and the controllerThe ST7789VW is a single-chip controller/driver for 262K-color, graphic type TFT-LCD. It consists of 240 source and 320 gate driving circuits. Theresolution of this LCD is 240(H)RGB x 240(V), it supports horizontal mode and vertical mode, and it doesn't use all the RAM of the controller.This LCD accepts 8-/9-/16-/18- parallel interface, that are RGB444, RGB565, RGB666. The color used in demo codes is RGB565.This LCD uses a 4- SPI interface for reducing GPIO and fast speed.LCDNote: Pico is NOT included.color:BlueMaterial:PCBPackage Contents:1 x Pico-LCD-1.3Only the above package content, other are not included.Note: Light and different displays may cause the color of the item in the a little different from the real thing. The measurement allowed error is +/- 1-3cm.