For 14 Pro Front Screen Outer Glass Lens with OCA Optically Clear Adhesive Before Installation Notes 1. Test before installation. When testing, do not remove any protective film or tags. Pay attention to static electricity. Before attempting any repair, ground yourself using an ESD (electrostatic discharge) strap to prevent static damage to internal electronic components. Wear eye protection and handle with care to avoid injury from glass splinters. 2. Screen replacement is a fragile product. Test before installation. Perform a simulation test by disassembling the phone, connecting the motherboard, LCD or screen, audio cable, and the new replacement, then power on to test. If the test is successful, proceed with installation. If the screen does not display, contact support immediately. Do not force installation. No responsibility will be taken after the screen is installed. 3. Do not over-bend the cable. Avoid bending the LCD cable beyond 90 degrees, as this may cause a black display. About the Product Replacement front screen outer glass lens with OCA optically clear adhesive for 14 Pro. Replace your damaged or non-functional screen with a new one. Restore your device to a like-new appearance. Designed for full compatibility and proper fit. Each unit is inspected and in good condition prior to shipping. Professional installation is highly recommended. No responsibility will be taken after installation.