説明
Hall effect current sensor
No voltage drop and heat on current sensor components
Offset and Sensitivity are calibrated in factory
Made of high-quality materials, sturdy and
Easy to use
Offset and sensitivity are factory calibrated
Continuous current rating: 0~150A DC
Sensitivity: 20mV/A, INAV/ ratio = 200, BATT_AMP_PERVLT = 50
VBAT voltage sensing: 0~69V, INAV ratio = 2100, ratio = 210, BATT_VOLT_MULT = 21.0
Power consumption: 17mA
Voltage offset error at zero current: +-10mV
Current output voltage error: 5%
Operating temperature: -30~80 C
Vbat: for voltage sensing, supports 0~69V IN
Voltage: = 1/21 Vbat, 0~3.3V output
Current: current signal, 0~3.3V output
5V: -150A board power supply, supports 4~13V Input, 17mA
G: GND
TX/RX: For firmware update and configuration (to be supported)
Tip: Hall sensor should be installed away from iron and magnetic materials
(Due to different batches, the printed words on the product will be different, which does not affect use)
Material: PCB
colour: As shown
Package Contents:
1 x Hall Current Sensor
Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
-
Fruugo ID:
319724968-710080376
製品安全情報
以下に概説するこの製品に固有の製品安全性情報を参照してください。
以下の情報は、この製品を販売する独立したサードパーティ小売業者によって提供されています。
製品安全ラベル
安全上の警告:
Before using this product, please read and understand all instructions carefully.
Health warning: If you feel any discomfort during use, please stop using it immediately and consult a doctor.
Allergy warning: Do not use if you are allergic to any ingredient in this product.
Storage precautions: Please keep this product out of the reach of children.
Expiration date: Please use this product within the expiration date indicated on the package.
材料:
100%
メーカー型番:
K3099
モデル番号:
K3099
シリアルナンバー:
K3099
バッチ番号:
K3099
