説明
Features:
[DC Programmable Electronic Load Tester] -- With 150V wide voltage, 40A large current, 400W large power, it provides CC, , CR, CP and CC+, CR+several basic measurement modes, professional battery test and LED test.
[High Performance Load] -- The Tran test mode can test the dynamic output performance of the power supply; the scan test mode can test the continuity of power output within a certain range; the list test mode can simulate a variety of loading status changes; the shot circuit test can be used to simulate load short circuit.
[User-friendly Design] -- 2.8-inch TFT LCD screen provides clear digital display, which greatly enhances the reading and using experience. The operation process is simple and convenient, and with key lock function to prevent misoperation.
[Other Functions] -- Remote operation via USB interfaces. Built-in buzzer alarm. Maintain data storage in case of power failure.
[Multiple Safety Protection] -- It provides overcurrent, overvoltage, overpower and over temperature protection. The over current and overvoltage parameters can be set flexibly, so as to effectively protect the load. With input polarity reverse prompt.
[Intelligent Fan Speed Control] -- It has intelligent fan speed control function, which can effectively reduce the fan noise when it's working. With multiple cooling holes for porous heat dissipation, prolongs service life.
Specifications:
Plug: EU/ US (Optional)
Display: 2.8" TFT LCD Screen, 400*240 Resolution
Rated Power: 400W
Rated Input Voltage: 0-150V
Rated Input Current: 0-40A
Mode:
0.1-19.999V, 0.1-150.00V Range
1mV, 10mV Resolution
±(0.05%+0.02%FS) Accuracy
CC Mode:
0-3.000, 0-40.00A Range
1mA, 10mA Resolution
±(0.05%+0.05%FS) (0-30A), ±(0.08%+0.1%FS) (30-40A) Accuracy
CR Mode:
0.05Ω-1KΩ, 1KΩ-4.5KΩ Range
10mΩ, 100mΩ Resolution
±(0.1%+0.5%FS) Accuracy
CP Mode:
0-400W Range
10mW Resolution
±(0.1%+0.5%FS) Accuracy
Tran Test Mode: CC,
T 1&T2: 1ms-60s; 0.1%+1ms Accuracy
Battery Test (Discharge Mode): CC, CR
Max. Discharge Capacity: 9999Ah
Resolution: 1mA, 10mA, 10mΩ, 100mΩ
Interface: USB
Operating Temp.: 0~40&
8451;
Storage Temp.: -10~70&
8451;
Relative Humidity: <80%
Item Size: Approx. 90 * 190 * 310mm / 3.54 * 7.48 * 12.20in
Item Weight: Approx. 3600g / 7.94lbs
Package Size: Approx. 39 * 29 * 19.5cm / 15.35 * 11.42 * 7.68in
Package Weight: Approx. 4300g / 9.48bs
Package List:
1 * DC Programmable Electronic Load Tester
1 * Power Cord
2 * Fuse
1 * User Manual (English)
-
Fruugo ID:
145812650-307556313
-
EAN:
884702163863
製品安全情報
以下に概説するこの製品に固有の製品安全性情報を参照してください。
以下の情報は、この製品を販売する独立したサードパーティ小売業者によって提供されています。
製品安全ラベル
安全上の警告:
Please note that the product is safe under normal use conditions. However, improper use may lead to hazards such as damage, injury or other safety risks. Please read and follow the instructions carefully.This product complies with EU safety standards. However, for your safety, if any abnormality (such as strange smell, overheating, loose parts, etc.) is found during use, please stop using it immediately.In accordance with the EU General Product Safety Regulation, we remind you that this product is only suitable for [specific applicable people / scenarios]. Use in non - specified people / scenarios may bring potential safety hazards.
