Description:Oxidation resistivity, anti-corrosion protection and good thermal conductivity are the features of this older remover wire.The tin on the pins can be sucked away to ensure that there is no short circuit between the pins. The success rate of reballing can be increased during reballing BGA components, if you use the soldering wire to clean the pads of the BGA components. You could use the soldering wire when the pins are connected to tin when welding IC and other components.Precisely braided with copper wire, this solder remover wire has low residue and does not need to clean, which is necessary to clean the pad.Both the length and width is 5cm, and the height us 2cm.The solder remove wire can quickly absorb a large amount of tin and remove excess solder, and it is suitable for all kinds of electronics, electrical appliances, precision instruments, etc.Item Name: Solder Remover WireMaterial: Copper WireSpecification: 1.5mm, 2.0mm, 2.5mm, 3.0mm, 3.5mm Cable Length: 1.5mSize Details: Size: 5cm x 5cm x 2cm/1.97" x 1.97" x 0.79" (Approx.)Notes:Due to the light and screen setting difference, the item's color may be slightly different from the pictures.Please allow slight dimension difference due to different manual measurement.Package Includes:1 x Solder Remover Wire