1.54inch e paper Module (B) 200 x 200 E ink Display Screen for Raspberry Pi

¥10,490
配送料無料

1.54inch e paper Module (B) 200 x 200 E ink Display Screen for Raspberry Pi

  • ブランド: Unbranded

1.54inch e paper Module (B) 200 x 200 E ink Display Screen for Raspberry Pi

  • ブランド: Unbranded
価格: ¥10,490
販売元:
¥10,490
配送料無料

在庫あり

以下の支払い方法を利用することができます

説明

1.54inch e paper Module (B) 200 x 200 E ink Display Screen for Raspberry Pi

Features 1.This E-Ink display module, 1.54inch, 200x200 resolution, with embedded controller, communicating via SPI interface, supports red, black, and white three-color display. 2.No backlight, keeps displaying last content for a long time even when power down. 3.Ultra low power consumption, basically power is only required for refreshing. 4.SPI interface, for connecting with controller boards like Raspberry Pi/Nucleo, etc. 5.Comes with development resources and manual (examples for Raspberry Pi/STM32). Specification Description: This E-Ink display module, 1.54inch, 200x200 resolution, with embedded controller, communicating via SPI interface, supports red, black, and white three-color display. Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight, it is an ideal choice for applications such as shelf label, industrial instrument, and so on. Features: No backlight, keeps displaying last content for a long time even when power down. Ultra low power consumption, basically power is only required for refreshing. SPI interface, for connecting with controller boards like Raspberry Pi/Nucleo, etc. Comes with development resources and manual (examples for Raspberry Pi/STM32). Specifications: Operating voltage: 3.3V Interface: 3-wire SPI, 4-wire SPI Outline dimension: 48mm x 33mm / 1.9" x 1.3" Display size: 27.6mm x 27.6mm / 1.1" x 1.1" Dot pitch: 0.138 x 0.138 Resolution: 200 x 200 Display color: red, black, white Grey level: 2 Refresh power: 26.4mW(typ.) Standby power: < 0.017mW Viewing angle: > 170° Package weight: 30g Interfaces: VCC: 3.3V GND: Ground DIN: SPI MOSI pin CLK: SPI SCK pin CS: SPI chip selection, low active DC: Data/Command selection (high for data, low for command) RST: External reset, low active BUSY: Busy status output, low active Package List: 1 x 1.54inch e-Paper Module (B) 1 x XH2.54 8Pin Cable (20cm / 7.9in) Note: If you want more tutorials and instructions about this product, please contact us, we will send related information to you. Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering. Package List
  • Fruugo ID: 271409577-601708553
  • EAN: 9370907476699

製品安全情報

以下に概説するこの製品に固有の製品安全性情報を参照してください。

以下の情報は、この製品を販売する独立したサードパーティ小売業者によって提供されています。

製品安全ラベル

CE Mark
安全上の警告: This product does not require safety information.

配送と返品

10日間以内に発送

  • EXPRESS: 無料 - 間の配達 金 19 12月 2025–月 22 12月 2025 - 無料 - 最 速

  • STANDARD: 無料 - 間の配達 金 26 12月 2025–金 02 1月 2026 - 無料

中国より発送。

ご注文の商品は、お客様の仕様に従い、万全の状態で配送されるように最善を尽くしています。しかし、もし注文に抜けがあったり、注文したものと違う商品が届いたり、注文に満足できないその他の理由がある場合は、注文全体やその中のいずれかの商品を返品し、その全額の返金を受けることができます。 全額返金ポリシーを見る