1.8" Round Capacitive Touch Display Module with ESP32-S3 Processor and 16MB Flash for IoT Projects

1. This 1.8-inch LCD module uses the ESP32-S3R8 chip as the main controller. It is a dual-core MCU that integrates Wi-Fi and Bluetooth BLE 5.0 functions. 2. The main frequency can reach 240 MHz, and the chip integrates 520 KB SRAM, 8 MB PSRAM, 448 KB ROM, and external 16 MB flash memory. 3. The display screen resolution is 360x360 with capacitive touch. The module includes an LCD display, backlight control circuit, touch screen control circuit, I2S digital microphone circuit, I2S analog-to-digital conversion circuit, TF card interface, and wireless power circuit. 4. This module supports secondary development in environments such as Arduino IDE, ESP-IDF, MicroPython, and LVGL. 5. 1.8-inch round screen ESP32-S3 development board with capacitive touch screen, 16 MB flash, IoT/LVGL development support. Product specifications: ESP32-S3 [1.8-inch round screen capacitive touch] Power supply voltage: 5 V Main frequency: 240 MHz Power supply current: 200 mA Memory: 16 MB flash Processor: ESP32-S3 Number of processor cores: 2 Note: The image is a high-definition rendering. Product appearance, color, and printed characters may vary slightly between batches, but these differences do not affect functionality. Color: As shown Material: ABS Package contents: 1 x Capacitive touch screen development board module Note: Light reflection and display settings may cause slight color variation between the image and the actual product. Measurement tolerance: ±1–3 cm.